SPECIFICATIONS

TYPE3: Solar Panel Kit

TYPE2: Pure Sine Wave

TYPE1: Solar Power

POWER: 4000W/6000/8000W

Origin: Mainland China

Model Number: Solar Panel Kit

Certification: CE,RoHS

Solar Panel Kit Complete 4000W/6000W/8000W Pure Sine Wave Power Inverter Home Solar Power Generation System with 30A Solar Controller

Solar Panel Features :
* USB voltage regulator: USB 5V, maximum 3A output, can charge mobile phones, mobile power, GPS, lights and other electronic devices. The problem of outdoor power shortage.
* Cigarette lighter: car battery charger, car battery is insufficient and unable to start the problem.
* Alligator clip: the cost of the 12V battery, to supplement the extra electricity
* Suitable for outdoor, camping, hiking, climbing, traveling, fishing, desert island survival
* Waterproof design, IP65 grade, light and portable, easy to carry.


Specification:
Name: 20W Monocrystalline Solar Panel

Model: JH-20W

Maximum power: 20W

Maximum power voltage: 18V

Maximum power current: 1.12A

Open circuit voltage: 20V

Short circuit current: 1.5A

Number of cells: 36Pcs


Power Inverter 4000W/6000W/8000W
Specifications:

-Name: Pure sine wave power inverter

-Input voltage: DC 12V for car (9.8~15V)

-Output voltage : AC 220V (210~230V)/110V

-Output frequency: 50Hz/60HZ

-Peaks Power : 3000W/4000W/6000W/8000W/10000W

-Rated power: 3000W/4000W/6000W/8000W/10000W (Please make sure that the total rated power of the connected devices is ≤500W / 800W /1000W /1300W/1500W )

-Product size: 21X10.3X6cm

-Maximum Active Surge Rating (less than 1 second) :6000W

-Maximum AC Current per socket :8.33Ampere

-Output Waveform: True/pure sine wave (<3% THD)


Efficiency: 90≥%   

-No Load Current Draw (DC side) <0.6 A


-8 Safety Protection Function: 

Reverse polarity protection, Low input voltage protection, High input voltage protection, Over-current protection, Short circuit protection, Over temperature protection, Overload protection, Internal fuses

Features:

[Pure Sine Wave] Converts 12V DC to AC 220V household wall power with continuous 1000Watts output ( 6000Watts surge capability) with 1 AC receptacles, one LED Voltage display, high current DC terminals and two LED work lights. (Please make sure that the total rated power of the connected devices is ≤ 1000W).


What Size Power Inverter Do I Need?

The size you choose depends on the watts (or amps) of what you want to run (find the power consumption by referring to the specification plate on the appliance or tool). We recommend you buy a larger model than you think you'll need (at least 10% to 20% more than your largest load).


3. 30A 12V 24V Automatic Solar Charge Controller PWM with LCD Controller and Dual USB

Charge Current: 30A

Product Size: 148.5x78x35mm

Voltage: DC 12V / 24V Auto intelligent conversion

Display: LCD digital display

USB Charger Ports: Dual USB 5V 2.1A

Operating Temperature: -35~+60

Max Solar Input: 12V battery, the highest 23V

Float Charge: 13.7V (default, adjustable)

Discharge Stop: 10.7V (default, adjustable)

Discharge Reconnect: 12.6V (default, adjustable)

Charge Reconnect: 13V

Voltage of Open Light: Solar Panel 8V (Light lights delay)

Voltage of Close Light: Solar Panel 8V (Light off delay)

USB Output: 2 way USB output, 5V/2.5A (MAX)



Packing included:

1 x Power Inverter

2 x Battery Clip

1 x 20W 18V Solar Panel

1 x Solar Charge Controller 30A 12V/24V

NOTE:(Pure Sine Wave Inverter suitable for sensitive load appliances, such as refrigerators, air conditioners, coffee machines, bread machines, induction cookers, etc.)

CAUTION:

1. Tighten the Positive (+) and Negative (-) terminals when the car converter is in use

2. If the converter is directly connected with the cigarette lighter. The highest out put power must be under 150W. If higher than 150W,we strongly recommend you using the Crocodile Clips to a battery ,because car cigarette lighter might not afford power over 150W.

3. 12V car converter suitable for DC12V and Car ONLY, 24V car converter suitable for DC24V and Truck.

4. Please do not leave the inverter in the ON position before car start. It's easy to damage the inverter before connected to the battery. The correct operation is connect to the battery first and then turn on the inverter switch.

5. It's normal for the inverter to become warm while you are using it. Please put the inverter on the flat surface The working place should keep dry, keep the inverter away from moisture or water. Do not put the inverter next to heat vents or other devices(between 0 Celsius degrees and 40 Celsius degrees). Try to keep the inverter not be shined directly by the sunshine.